Upon installation HYDRASCALE will immediately begin treating your water.
2.
After sixty (60) days it may be necessary to flush scale residue from screen traps, water heaters, storage tanks and piping if the system has severe scale buildup. Scale residue is a sign that the HYDRASCALE is working.
3.
HYDRASCALE will reduce existing scale to slurry or small granules. Once this residue has been flushed from the system scale should not recur.
4.
In the water systems with extreme scale buildup, chunks of scale can break loose from heat exchange surfaces and pipe walls. This is proof that HYDRASCALE is working. Chunks of scale can be flushed by removing faucet aerators and allowing water to flow.
Model
Sweat Connection
Overall
Length
Max
Flow
Rate
Water Hardness Performance Parameters
HS075
3/4
INCH
10
INCHES
10
GPM
If water hardness is 20 GPG or greater and flow rate is 8-10 GPM then a HS150 (1-1/2”) is recommended to completely condition the water and extend the life of the unit.
HS150
1-1/2
INCH
14
INCHES
28
GPM
If water hardness is 20 GPG or greater and flow rate is 23-28 GPM a HS250 (2-1/2”) is recommended to completely condition the water and extend the life of the unit.
HS250
2-1/2 INCHES
16
INCHES
83
GPM
If water hardness is 20 GPG or greater and flow rate is 70-83 GPM a HS400 (4”) is recommended to completely condition the water and extend the life of the unit.
HS400
4 INCHES
24
INCHES
112
GPM
If water hardness is 20 GPG or greater and flow rate is 90-112 GPM a HS600 (6”) is recommended to completely condition the water and extend the life of the unit.
Custom applications available upon request. Please contact Spectrum Associates for more information. Thank you!
